Our Products

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. FIXED is a recessed non-adjustable downlight available with trimmed or trim-less UNIVERSAL bezels! Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. Directional is a recessed Tilt & Rotate adjustable downlight available with trimmed or trim-less UNIVERSAL bezels! Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. Snoot is a recessed Tilt & Rotate "Darklight" adjustable downlight available with trimmed or trim-less UNIVERSAL bezels! Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. Snoot is a recessed Tilt & Rotate "Projector" adjustable downlight available with trimmed or trim-less UNIVERSAL bezels! Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. Deep Snoot is a recessed Tilt & Rotate "Darklight" adjustable downlight available with trimmed or trim-less UNIVERSAL bezels! Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. Cone is a non-adjustable downlight with a Conical reflector available with trimmed or trimless UNIVERSAL bezels! Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. Wall Wash is a non-adjustable downlight housing special Asymmetric optics, available with trimmed or trimless UNIVERSAL bezels! Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. The adjustable Eyeball with fixed or special zoom optics, is available with trimmed or trimless UNIVERSAL bezels! Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. Recessed adjustable tubular spot that retracts in & out of the ceiling, available with trimmed or trimless UNIVERSAL bezels! Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. The Recessed non-adjustable Totally flush version can have Opal / Woven or Ribbed glass lenses with trimmed or trimless UNIVERSAL bezels, ideal for a shower or where you simply want a clean Wide distribution. Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The NEW YODA range incorporating the Latest, Site replaceable CLU703 - CITIZEN VIVID COB, Tiny 4.2mm LES and very high led Density Give outstanding Control & Efficacy, coupled with the Yoda’s ingenious modularity delivers an outstanding package for universal usage. The Recessed non-adjustable Asymmetric Floor Washer has interchangeable lenses with trimmed or trimless UNIVERSAL bezels! Our Yoda II range features universal sizing and System universality. Fit our bezels and any of our variants can be fitted into those bezels: fixed/directional/wall wash/snoot/deep snoot etc.

The Yoda 40-2 is a Miniature led downlight for accent or display purposes. The Diecast aluminium body, deep baffle, Superb "CREE XP-E" led and interchangeable optics come together to create a beautiful miniature fitting. Super low glare with a 59º cutoff and CREE XP-E Chip.

The Yoda 58-10 is a Miniature led downlight for accent or display purposes. The Diecast aluminium body, deep baffle, Luminus CXM-6 led and interchangeable optics come together to create a beautiful miniature fitting. Super low glare with a 59º cutoff and LUMINUS CXM-6 AC40 COB

The Yoda 70-15 is a Miniature led downlight for accent or display purposes. The Diecast aluminium body, deep baffle, Luminus CXM-6 led and interchangeable optics come together to create a beautiful miniature fitting. Super low glare with a 59º cutoff and LUMINUS CXM-6 AC40 COB

PICO is a range of Miniature downlights in Pin-Hole / Darklight and directional versions ranging from 1W to 3.7W delivering impresive outputs from 50>172lm. Bodies are machined from high purity aluminium to ensure Optimum thermal efficiency to ensure excellent longevity >50,000hrs. Pico range uses the latest Luminus SST-20 LED chip, delivering impressive lm/W outputs and a CRI>95.

PICO is a range of Miniature downlights in Pin-Hole / Darklight and directional versions ranging from 1W to 3.7W delivering impresive outputs from 50>172lm. Bodies are machined from high purity aluminium to ensure Optimum thermal efficiency to ensure excellent longevity >50,000hrs. Using the latest Luminus SST-20 LED chip delivering impressive lm/W outputs and a CRI>95.

PICO is a range of Miniature downlights in Pin-Hole / Darklight and directional versions ranging from 1W to 3.7W delivering impresive outputs from 50>172lm. Bodies are machined from high purity aluminium to ensure Optimum thermal efficiency to ensure excellent longevity >50,000hrs. Using the latest Luminus SST-20 LED chip delivering impressive lm/W outputs and a CRI>95.

PICO is a range of Miniature downlights in Pin-Hole / Darklight and directional versions ranging from 1W to 3.7W delivering impresive outputs from 50>172lm. Bodies are machined from high purity aluminium to ensure Optimum thermal efficiency to ensure excellent longevity >50,000hrs. Using the latest Luminus SST-20 LED chip delivering impressive lm/W outputs and a CRI>95.

PICO is a range of Miniature downlights in Pin-Hole / Darklight and directional versions ranging from 1W to 3.7W delivering impresive outputs from 50>172lm. Bodies are machined from high purity aluminium to ensure Optimum thermal efficiency to ensure excellent longevity >50,000hrs. Using the latest Luminus SST-20 LED chip delivering impressive lm/W outputs and a CRI>95.

PICO is a range of Miniature downlights in Pin-Hole / Darklight and directional versions ranging from 1W to 3.7W delivering impresive outputs from 50>172lm. Bodies are machined from high purity aluminium to ensure Optimum thermal efficiency to ensure excellent longevity >50,000hrs. Using the latest Luminus SST-20 LED chip delivering impressive lm/W outputs and a CRI>95.

PICO is a range of Miniature downlights in Pin-Hole / Darklight and directional versions ranging from 1W to 3.7W delivering impresive outputs from 50>172lm. Bodies are machined from high purity aluminium to ensure Optimum thermal efficiency to ensure excellent longevity >50,000hrs. Using the latest Luminus SST-20 LED chip delivering impressive lm/W outputs and a CRI>95.

PICO is a range of Miniature downlights in Pin-Hole / Darklight and directional versions ranging from 1W to 3.7W delivering impresive outputs from 50>172lm. Bodies are machined from high purity aluminium to ensure Optimum thermal efficiency to ensure excellent longevity >50,000hrs. Using the latest Luminus SST-20 LED chip delivering impressive lm/W outputs and a CRI>95.

"Super-Flux" is a technical revelation - its deep drawn High purity aluminium baffle delivers a class leading UGR<19 anti-glare design, but at the same time, the luminare luminous efficacy can reach up to 110 to 120Lm/W, it's not easy to achieve a perfect balance between anti-glare and high efficiency. The design diverges from traditional wide-trim designs by using a super slim 5mm wide bezel to minimise the visual impact. The reflector and outer bezel are seamlessly integrated via a fine machined thread, and the natural clean design reduces the abruptness of the lamp on the ceiling, to add to the minimamisalism we can match the Bezel to your Ceiling colour and offer the baffle in various finishes: Matt Black (as standard) / Matt silver / Matt Gold / Matt Bronze / Matt Copper The complex Parabola Baffle design ensures the light output is soft and low-glare, making the luminance comfortable to live with, the clean lines ensure a beautiful minimal downlight aperture, This is our Best ever Minimal, IP65, Low-Glare, High Efficacy downlight range available in 15 / 25 & 35W versions (1500/2500/4000lm @ 3000K)

"Super-Flux" is a technical revelation - its deep drawn High purity aluminium baffle delivers a class leading UGR<19 anti-glare design, but at the same time, the luminare luminous efficacy can reach up to 110 to 120Lm/W, it's not easy to achieve a perfect balance between anti-glare and high efficiency. The design diverges from traditional wide-trim designs by using a super slim 5mm wide bezel to minimise the visual impact. The reflector and outer bezel are seamlessly integrated via a fine machined thread, and the natural clean design reduces the abruptness of the lamp on the ceiling, to add to the minimamisalism we can match the Bezel to your Ceiling colour and offer the baffle in various finishes: Matt Black (as standard) / Matt silver / Matt Gold / Matt Bronze / Matt Copper The complex Parabola Baffle design ensures the light output is soft and low-glare, making the luminance comfortable to live with, the clean lines ensure a beautiful minimal downlight aperture, This is our Best ever Minimal, IP65, Low-Glare, High Efficacy downlight range available in 15 / 25 & 35W versions (1500/2500/4000lm @ 3000K)

"Super-Flux" is a technical revelation - its deep drawn High purity aluminium baffle delivers a class leading UGR<19 anti-glare design, but at the same time, the luminare luminous efficacy can reach up to 110 to 120Lm/W, it's not easy to achieve a perfect balance between anti-glare and high efficiency. The design diverges from traditional wide-trim designs by using a super slim 5mm wide bezel to minimise the visual impact. The reflector and outer bezel are seamlessly integrated via a fine machined thread, and the natural clean design reduces the abruptness of the lamp on the ceiling, to add to the minimamisalism we can match the Bezel to your Ceiling colour and offer the baffle in various finishes: Matt Black (as standard) / Matt silver / Matt Gold / Matt Bronze / Matt Copper The complex Parabola Baffle design ensures the light output is soft and low-glare, making the luminance comfortable to live with, the clean lines ensure a beautiful minimal downlight aperture, This is our Best ever Minimal, IP65, Low-Glare, High Efficacy downlight range available in 15 / 25 & 35W versions (1500/2500/4000lm @ 3000K)

Luxury bedside/bedhead reading light, Manufactured from German produced Flexi-Tube with solid brass machined head and base parts. Flexi-tube covered in hand stiched leather, Colour of your Choice! Capacitive touch switch functionality - touch on/touch off, touch and hold to dim up/down! Remote driver 3.1V / 1050mA Typical lms @ 2700K = 324lm "Stem version" - M10 stud mounting, requires rear access to fix mounting nut and washer "Escutchion" - front fixed with 3 concealed Fixing screws and escutchion cover plate, secured with M3 grub screw. We Typically make this piece to customers Specification so please contact us for options currently available.

Beautifully Simple surface mounted low-glare Spot with extruded aluminium body & stem delivering clean lines and a huge variety of finishes for body & baffles. Dia-50 x 23mm surface mounted BESA box with integrated terminations - 3/5 pole Static White / Dynamic White (Remote drivers) or Dim to warm options (onboard driver)

Beautifully Simple low-glare Spot with extruded aluminium body & stem delivering clean lines and a huge variety of finishes for body & baffles. Dia-80 x 2mm surface mounting plate with integrated terminations - 3/5 pole, ceiling Cutout = 60mm

Beautifully Simple low-glare Spot with extruded aluminium body & stem delivering clean lines and a huge variety of finishes for body & baffles. Includes: GLOBAL track adapter for both TRIAC & DALI variants

"PIPA 75" is our new framing projector available like all the Pipa range in Track/Surface or Semi-recessed versions, Introduced to Complement the range and provide a fully featured proffesional framing devise. Beatufully detailed in a Die-Cast aluminium body for efficient Cooling of the latest CITIZEN 20W <3SDCM chip set, with 120º of tilt 355º of rotation. Pipa is a comprehensive range of interior spots designed to give a Clean, Architectural appearance. Track, Surface or Semi-recessed versions with integral flicker free drivers / 4 beam angles / 5 x CCT including Dim to warm versions. Numerous colour options including any BS or RAL finish to your specification (Subject to min order qty). High Quality acrylic TIR lenses Track Adapters: https://www.aagstucchi.it/en/wp-content/uploads/warnings_pdf/en/338.pdf - in black or white only! IES/LDT files on request / 5 year warranty / LED's & DRIVERS - Vosloh/OSRAM/CITIZEN or PHILIPS only.

The "Tubo" Range of surface mounted Non-Directional downlights feature a simple, clean, slim extruded aluminium Heatsink housing design, with NO visible fixings! Utilising the extruded body with internal cooling fins as the hestsink allows Higher outputs from a smaller luminaire also ensuring gauranteed lifespan, LED and thermal efficiency. The deeply baffled design adds comfortable low glare and IP20 as standard but an IP54 version is also available so the same design can be used in moist/humid areas such as Pools/Spas/Gyms/Shower rooms etc. Available in: 2700 / 3000 / 3500 or 4000K - CRI90 10 / 15 / 25 & 30W outputs 1100lm / 1600lm / 2600lm / 3100lm 15 / 24 / 36 or 50 degree optics integrated TRIAC or DALI drivers DALI Tuneable White / Casambi Dim White / Casambi Tuneable white versions also available IP20 or IP54 versions Various Body & Baffle finishes

The "Tubo" Range of surface mounted Non-Directional downlights feature a simple, clean, slim extruded aluminium Heatsink housing design, with NO visible fixings! Utilising the extruded body with internal cooling fins as the hestsink allows Higher outputs from a smaller luminaire also ensuring gauranteed lifespan, LED and thermal efficiency. The deeply baffled design adds comfortable low glare and IP20 as standard but an IP54 version is also available so the same design can be used in moist/humid areas such as Pools/Spas/Gyms/Shower rooms etc. Available in: 2700 / 3000 / 3500 or 4000K - CRI90 10 / 15 / 25 & 30W outputs 1100lm / 1600lm / 2600lm / 3100lm 15 / 24 / 36 or 50 degree optics integrated TRIAC or DALI drivers DALI Tuneable White / Casambi Dim White / Casambi Tuneable white versions also available IP20 or IP54 versions Various Body & Baffle finishes

The "Tubo" Range of surface mounted Non-Directional downlights feature a simple, clean, slim extruded aluminium Heatsink housing design, with NO visible fixings! Utilising the extruded body with internal cooling fins as the hestsink allows Higher outputs from a smaller luminaire also ensuring gauranteed lifespan, LED and thermal efficiency. The deeply baffled design adds comfortable low glare and IP20 as standard but an IP54 version is also available so the same design can be used in moist/humid areas such as Pools/Spas/Gyms/Shower rooms etc. Available in: 2700 / 3000 / 3500 or 4000K - CRI90 10 / 15 / 25 & 30W outputs 1100lm / 1600lm / 2600lm / 3100lm 15 / 24 / 36 or 50 degree optics integrated TRIAC or DALI drivers DALI Tuneable White / Casambi Dim White / Casambi Tuneable white versions also available IP20 or IP54 versions Various Body & Baffle finishes

The "Tubo" Range of surface mounted Non-Directional downlights feature a simple, clean, slim extruded aluminium Heatsink housing design, with NO visible fixings! Utilising the extruded body with internal cooling fins as the hestsink allows Higher outputs from a smaller luminaire also ensuring gauranteed lifespan, LED and thermal efficiency. The deeply baffled design adds comfortable low glare and IP20 as standard but an IP54 version is also available so the same design can be used in moist/humid areas such as Pools/Spas/Gyms/Shower rooms etc. Available in: 2700 / 3000 / 3500 or 4000K - CRI90 10 / 15 / 25 & 30W outputs 1100lm / 1600lm / 2600lm / 3100lm 15 / 24 / 36 or 50 degree optics integrated TRIAC or DALI drivers DALI Tuneable White / Casambi Dim White / Casambi Tuneable white versions also available IP20 or IP54 versions Various Body & Baffle finishes

Fox Bollards are beautifully crafted from 2mm thick High purity Aluminium tube, machine swaged with Cast Aluminium LED top Housing to create a sleek high output LED Floorwasher, available with integral 240VAC driver or remote ELV -24VDC version. Integral IP54 198-264VAC > 24VDC driver within the ⌀40 x 500mm tall aluminium stem LV Constant Voltage IP65 led array - 927 / 930 / 940K, 3 or 6W versions 125mm circular led array, 3W / 265lms, 6W / 530lms Swaged tube assembly Dia 14>40mm x 500 or 750mm with Dia 10mm spike assembly, side cable exit supplied pre-fitted with 10M 2 core Black Butyl rubber 0.75mm flex (3182TQ/75) Life - >50,000 hours (5 year manufacturers warranty) Selection of anodised finishes (can mix & Match LED housing and Swaged stem Special versions including BS/RAL finishes on request

The Fox pendants are beautifully crafted from 2mm thick High purity Aluminium tube, machine swaged to create a sleek high output LED pendant. Integral TRIAC dimming driver within the ⌀100 x 125mm tall aluminium ceiling housing. Constant current CREE XHP35-HD LED 927 / 930 / 940K 4/6/8 or 13W versions interchangeable Lenses: 19 / 30 / 44 / 62° symmetrical distribution CRI90 / HPF / DEKRA approved Life - >50,000 hours (5 year manufacturers warranty) Beautiful Selection of Vibrant anodised finishes (can mix & Match Ceiling housing and Pendant Body, Baffle finish - Black as standard (Special finishes on request) Special BS/RAL finishes on request

“Jord 50 -Flush" includes a Flush mount Cast 316 St-Steel Burial tube, Jord is a patented family of precision machined, low-glare, VERY high lumen output (465>1162lms) in-ground or wall mounted LED luminaires. Utilising only the best materials and the very latest LED and lens technology to deliver outstanding outputs from such a small luminaire, the ingenious patented heat pipe, design & onboard microprocessor make the Jord 50 range simply the best miniature IP68 projectors available. Designed specifically to withstand the rigours of Motor Yacht installations where the environment demands exceptional corrosion resistance, if they can survive the Atlantic, they can easily withstand Saline pools, tropical gardens or Spa applications. This is simply the best "NO COMPROMISE" miniature in-ground uplight range available! Fitted with the New Nichia Quad chip with Very high Lm Density 1162lm from an LES of only 3.12mm, & our Patented Heatpipe technology enables Ingenious to create a super high power collimated uplight @ 11W/1162lm and only Diameter 50mm 12VDC Constant Voltage option also available.

“Jord 50 -Trimmed" with an optional Cast St-Steel Burial tube, Jord is a patented family of precision machined, low-glare, VERY high lumen output (465>1162lms) in-ground or wall mounted LED luminaires. Utilising only the best materials and the very latest LED and lens technology to deliver outstanding outputs from such a small luminaire, the ingenious patented heat pipe, design & onboard microprocessor make the Jord 50 range simply the best miniature IP68 projectors available. Designed specifically to withstand the rigours of Motor Yacht installations where the environment demands exceptional corrosion resistance, if they can survive the Atlantic, they can easily withstand Saline pools, tropical gardens or Spa applications. This is simply the best "NO COMPROMISE" miniature in-ground uplight range available! Fitted with the New Nichia Quad chip with Very high Lm Density 1162lm from an LES of only 3.12mm, & our Patented Heatpipe technology enables Ingenious to create a super high power collimated uplight @ 11W/1162lm and only Diameter 50mm 12VDC Constant Voltage option also available.

Jord 50 - Low-Profile Side emitter (NO uplight) with an optional 316 St-Steel Burial tube, This version incorporates a special Prism lens to direct light sideways, Jord is a patented family of precision machined, low-glare, VERY high lumen output (465>1162lms) in-ground or wall mounted LED luminaires. Utilising only the best materials and the very latest LED and lens technology to deliver outstanding outputs from such a small luminaire, the ingenious patented heat pipe, design & onboard microprocessor make the Jord 50 range simply the best miniature IP68 projectors available. Designed specifically to withstand the rigours of Motor Yacht installations where the environment demands exceptional corrosion resistance, if they can survive the Atlantic, they can easily withstand Saline pools, tropical gardens or Spa applications. This is simply the best "NO COMPROMISE" miniature in-ground uplight range available! 12VDC Constant Voltage option also available.

Jord 50- Low Profile side emitter with Uplight includes a Flush mount Cast Burial tube in 316 St-Steel, This version incorporates a special Prism lens to direct light sideways, Jord is a patented family of precision machined, low-glare, VERY high lumen output (465>1162lms) in-ground or wall mounted LED luminaires. Utilising only the best materials and the very latest LED and lens technology to deliver outstanding outputs from such a small luminaire, the ingenious patented heat pipe, design & onboard microprocessor make the Jord 50 range simply the best miniature IP68 projectors available. Designed specifically to withstand the rigours of Motor Yacht installations where the environment demands exceptional corrosion resistance, if they can survive the Atlantic, they can easily withstand Saline pools, tropical gardens or Spa applications. This is simply the best "NO COMPROMISE" miniature in-ground uplight range available! 12VDC Constant Voltage option also available.

The V2-HV light engines were specifically designed to replace poor quality "BC" & "ES" LED retrofit lamps. The V2 is a NEW Professional solution - they can be mounted Via the industry standard M10 x 1 female mounting thread or our ingenious magnetic mounting option, V2 delivers class leading efficacy, Longlife +50,000hrs (>10 years), ZERO maintenance and a +CRI90 solution that can easily be incorporated into Desklights / wall lights / downlights or chandeliers in either DRIVER ON BOARD 240VAC version or Constant current Low-Voltage versions (Requires a remote led driver). - CHIP ON BOARD - 6mm LES, Nichia COB, driver on board TRIAC dimming > 1%) PF 0.95 - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty L70/B50) - Bespoke Internal wiring PCB, 2 Pole, Push Wire, 0.5>1.5mm cables, integrated Cable retention - Light Venetian gold painted Body & Base - All versions include fully enclosed terminations and Double insulated cables - Magnetic mounting, supplied with Keeper washer, bond keeper to any surface and V2 is magnetically fixed 240VAC Certification: EN62031 / EN 62471 / EN 62493 / EN55015 / EN 61000-3-2 / EN 61000-3-3 / EN 61547 / IEC TR 62778 (RG1)

The V2-LV light engines were specifically designed to replace poor quality "BC" & "ES" LED retrofit lamps. The V2 is a NEW Professional solution - they can be mounted Via the industry standard M10 x 1 female mounting thread or our ingenious magnetic mounting option, V2 delivers class leading efficacy, Longlife +50,000hrs (>10 years), ZERO maintenance and a +CRI90/95 solution that can easily be incorporated into Desklights / wall lights / downlights or chandeliers in either Constant current Low-Voltage (LV) versions (Requires a remote led driver) or (HV) DRIVER ON BOARD 240VAC version. - "LV" Constant current - 4/6/8 or 13W versions (3mm LES, Nichia quad chip or Citizen CLU703 COB) remote driver, dimming options: TRIAC/0-10V/DALI/Bluetooth/DMX - Various clip on lenses to give colimated distribution - CRI90 / HPF / DEKRA approved - Life - >50,000 hours. - Bespoke Internal wiring PCB, 2 Pole, Push Wire, 0.5>1.5mm cables, integrated Cable retention - Light Venetian gold painted Body & Base - All versions include fully enclosed terminations and Double insulated cables - Magnetic mounting, supplied with Keeper washer, bond keeper to any surface and V2 is magnetically fixed - IP65 version available see "V2-IP65" can be used in bathrooms/exterior pendants etc. 12VDC Certification: EN62031 / EN62778 / UL8750 / UL153 / EN IEC 55015 / EN 61547 / EN IEC 61000-3-2 / EN 61000-3-3 / FCC PART 15 BNICHIA COB - 110 or 240VAC / 10W / 977lms LED Options: NICHIA NV4 - 11.4VDC / 350mA / 4W / 465lms NICHIA NV4 - 11.6VDC / 500mA / 6W / 697lms NICHIA NV4 - 11.86VDC / 700mA / 8W / 930lms NICHIA NV4 - 12.1VDC / 900mA(MAX) / 11W / 1162lms CLU703 - 33.3VDC / 150mA / 5W / 733lms CLU703 - 34.1VDC / 200mA / 6.8W / 956lms CLU703 - 35VDC / 250mA / 8.7W / 1168lms CLU703 - 35.7VDC / 300mA / 10.7W / 1371lms CLU703 - 36.5VDC / 350mA / 12.8W / 1566lms

The MORPH - IP66 light engine is a NEW Professional solution for Exterior lighting applications - they can be mounted Via the industry standard M10 x 1 female mounting thread(*), M6 Stainless Eyelet or Rear blind threaded mounting holes. The MORPH engines deliver class leading efficacy, Longlife >50,000hrs (>10 years), ZERO maintenance and +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants / table lamps OR USED on CATENARY wire systems. We can design & supply all decorative, Catenary systems, suspension parts & any option you can envisage! The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Led Chipsets: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS Dynamic White COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - White Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order. - All versions include fully enclosed terminations, Double insulated cables, integrated M6 GoreTex pressure relief gland. (* Must ensure sealing is satisfactory)

The MORPH - IP66 light engine is a NEW Professional solution for Exterior lighting applications - they can be mounted Via the industry standard M10 x 1 female mounting thread(*), M6 Stainless Eyelet or Rear blind threaded mounting holes. The MORPH engines deliver class leading efficacy, Longlife >50,000hrs (>10 years), ZERO maintenance and +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants / table lamps OR USED on CATENARY wire systems. We can design & supply all decorative, Catenary systems, suspension parts & any option you can envisage! The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Led Chipsets: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS Dynamic White COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - White Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order. - All versions include fully enclosed terminations, Double insulated cables, integrated M6 GoreTex pressure relief gland. (* Must ensure sealing is satisfactory)

The MORPH - IP66 light engine is a NEW Professional solution for Exterior lighting applications - they can be mounted Via the industry standard M10 x 1 female mounting thread(*), M6 Stainless Eyelet or Rear blind threaded mounting holes. The MORPH engines deliver class leading efficacy, Longlife >50,000hrs (>10 years), ZERO maintenance and +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants / table lamps OR USED on CATENARY wire systems. We can design & supply all decorative, Catenary systems, suspension parts & any option you can envisage! The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Led Chipsets: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS Dynamic White COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - White Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order. - All versions include fully enclosed terminations, Double insulated cables, integrated M6 GoreTex pressure relief gland. (* Must ensure sealing is satisfactory)

The MORPH - IP66 light engine is a NEW Professional solution for Exterior lighting applications - they can be mounted Via the industry standard M10 x 1 female mounting thread(*), M6 Stainless Eyelet or Rear blind threaded mounting holes. The MORPH engines deliver class leading efficacy, Longlife >50,000hrs (>10 years), ZERO maintenance and +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants / table lamps OR USED on CATENARY wire systems. We can design & supply all decorative, Catenary systems, suspension parts & any option you can envisage! The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Led Chipsets: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS Dynamic White COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - White Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order. - All versions include fully enclosed terminations, Double insulated cables, integrated M6 GoreTex pressure relief gland. (* Must ensure sealing is satisfactory)

The MORPH Horizontal wall - using our IP66 Morph light engine is a NEW Professional solution for Exterior lighting applications - The MORPH engine deliver class leading efficacy, Longlife >50,000hrs (>10 years), ZERO maintenance and +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants / table lamps OR USED on our CATENARY wire systems. We can design & supply all decorative, Catenary systems, suspension parts & any option you can envisage! The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Leds: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS DW COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - Borasilicate Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - Supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order.

The MORPH 30 degree wall fitted with Standard glass - incorporating our IP66 Morph light engine is a NEW Professional solution for Exterior lighting applications - The MORPH engine deliver class leading efficacy, Longlife >50,000hrs (>10 years), ZERO maintenance and +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants / table lamps OR USED on our CATENARY wire systems. We can design & supply all decorative, Catenary systems, suspension parts & any option you can envisage! The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Leds: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS DW COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - Borasilicate Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - Supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order.

The MORPH Tubular wall with Globe glass & shade - incorporating our IP66 Morph light engine is a NEW Professional solution for Exterior lighting applications - The MORPH engine deliver class leading efficacy, Longlife >50,000hrs (>10 years), ZERO maintenance and +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants / table lamps OR USED on our CATENARY wire systems. We can design & supply all decorative, Catenary systems, suspension parts & any option you can envisage! The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Leds: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS DW COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - Borasilicate Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - Supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order.

The MORPH Tubular wall with Chain, Globe glass & shade - incorporating our IP66 Morph light engine is a NEW Professional solution for Exterior lighting applications - The MORPH engine deliver class leading efficacy, Longlife >50,000hrs (>10 years), ZERO maintenance and +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants / table lamps OR USED on our CATENARY wire systems. We can design & supply all decorative, Catenary systems, suspension parts & any option you can envisage! The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Leds: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS DW COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - Borasilicate Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - Supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order.

The MORPH Tubular wall with stem, Globe glass & shade - incorporating our IP66 Morph light engine is a NEW Professional solution for Exterior lighting applications - The MORPH engine deliver class leading efficacy, Longlife >50,000hrs (>10 years), ZERO maintenance and +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants / table lamps OR USED on our CATENARY wire systems. We can design & supply all decorative, Catenary systems, suspension parts & any option you can envisage! The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Leds: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS DW COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - Borasilicate Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - Supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order.

The MORPH ceiling with chain, Globe glass & shade - incorporating our IP66 Morph light engine is a NEW Professional solution for Exterior lighting applications - The MORPH engine deliver class leading efficacy, Longlife >50,000hrs (>10 years), ZERO maintenance and +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants / table lamps OR USED on our CATENARY wire systems. We can design & supply all decorative, Catenary systems, suspension parts & any option you can envisage! The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Leds: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS DW COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - Borasilicate Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - Supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order.

The MORPH Catenary system is a system of components allowing the construction of complex Catenary wire systems to suit most applications - incorporating our IP66 Morph light engines + TECHNO plug & socket connectors + 316-St-Steel rigging we can design Systems to suit your application. The Huge advantage of Catenary systems is the low impact installation in terms of cost & infrastructure, and we can get the light where you want it without costly Colummns / bollards / etc. We can also include & integrate Tensile fabric structures to create Shade & weather protection. Morph Engines: The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading Leds: Options: 110/240VAC Nichia COB, Nichia "ART" Quad Chip, CITIZEN "VIVID" COB or LUMINUS "CTM9" Dynamic white 1800>4000K LED technology. Features/options: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, NANO Technology "driver on board" TRIAC dimming > 1%) PF0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia NV4W quad chip) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - "LV" Constant current - 16.5 or 23W versions (9.5mm LES, LUMINUS DW COB) remote drivers, dimming options: TRIAC / 0-10V / DALI / Bluetooth / Zigbee / DMX - Optional collimating lenses 20º / 28º or 48º, clip into the LED holder / housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted die-cast & machined Aluminium Body - Silicone sealing Gaskets. - Cast - Borasilicate Glass covers - 1 or 2 x M16-IP67 Nickel plated, brass cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Nickel plated brass Blanking Grommet) - Supplied with rear mounted M6 Goretex breather gland, options for M6 Eyebolt, M10x1 threaded hole, custom mounting arrangements to order.

The Morph Cage can be Included in any of the suspended or Catenary options above giving a different look and adding impact protection. MORPH-IP66 light engine is a New Professional solution for Exterior lighting applications - they can be mounted Via the industry standard M10 x 1 female mounting thread, M6 Stainless Eyelet or Rear blind threaded mounting holes. The V2-IP66 engines deliver class leading efficacy, Longlife +50,000hrs (>10 years), ZERO maintenance and a +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants OR USED on CATENARY wire systems. We can design & supply all decorative, suspension parts & luminaires for Catenary systems etc. The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading: Nichia COB or Nichia "ART" Quad Chip or NEW CITIZEN VIVID COB LED technology. Features: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, driver on board TRIAC dimming > 1%) PF 0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia quad chip) remote driver, dimming options: TRIAC / 0-10V / DALI / Bluetooth / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote driver, dimming options: TRIAC / 0-10V / DALI / Bluetooth / DMX - Collimating lenses 20 / 28 or 48 degree, clip into housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted Body - Silicone sealing Gasket. - Cast - White Glass cover - 1 or 2 x M16 IP67 Metal cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Metal Blanking Grommet) - All versions include fully enclosed terminations, Double insulated cables, integrated M6 GoreTex pressure relief gland.

Table/Desk - Morph-IP66 light engine is a NEW Professional solution for Exterior lighting applications - they can be mounted Via the industry standard M10 x 1 female mounting thread, M6 Stainless Eyelet or Rear blind threaded mounting holes. The V2-IP66 engines deliver class leading efficacy, Longlife +50,000hrs (>10 years), ZERO maintenance and a +CRI90 solution that can easily be incorporated into wall lights / Chandeliers / pendants OR USED on CATENARY wire systems. We can design & supply all decorative, suspension parts & luminaires for Catenary systems etc. The DIMMABLE DRIVER ON BOARD 110VAC or 240VAC version or our Constant current Low-Voltage versions all incorporate Class leading: Nichia COB or Nichia "ART" Quad Chip or NEW CITIZEN VIVID COB LED technology. Features: - "HV" Input Voltage - AC110VAC or 240VAC - 10W Version (6mm LES, Nichia COB, driver on board TRIAC dimming > 1%) PF 0.95 - "LV" Constant current - 4/6/8 or 10W versions (3mm LES, Nichia quad chip) remote driver, dimming options: TRIAC / 0-10V / DALI / Bluetooth / DMX - "LV" Constant current - 5/9 or 13W versions (4.2mm LES, CITIZEN COB) remote driver, dimming options: TRIAC / 0-10V / DALI / Bluetooth / DMX - Collimating lenses 20 / 28 or 48 degree, clip into housing to deliver controlled distribution. - CRI 80/90 / HPF / DEKRA approved - Life - >50,000 hours (5 year manufacturers warranty min-L70/B50) - Anodised & Wet painted Body - Silicone sealing Gasket. - Cast - White Glass cover - 1 or 2 x M16 IP67 Metal cable glands for through Wiring (supplied with 2 x M16 glands & 1 x M16 Metal Blanking Grommet) - All versions include fully enclosed terminations, Double insulated cables, integrated M6 GoreTex pressure relief gland.

Poly-Flux 6x12mm, CV & CC versions available - DC24V, 10W/M, 6mm x 12mm (W x H), 50mm modules, 120 leds/M, CRI>90, Lumileds 2835, 2 Step binning, Horizontal Bending, 30cm Open Wire from Both Ends, End/side/bottom feed Cable Entry, IP67 IF factory terminated, 5 Years Warranty, Max Run Length 13M fed from one End. Typical outputs @ 10W/M: 2700K-400lm/M 3000K-435lm/M 3500K-438lm/M 4000K-413lm/M 5000K-416lm/M 6000K-418lm/M

Poly-Flux 10x10mm, DC24V, CV & CC versions available, 11W/M, 10mm x 10mm (W x H), 41.66mm modules (24modules / M), 168LEDS/M, CRI>90, LUMILEDS 2835, single binning, Vertical Bending, 30cm Open Wire from Both Ends (End feed Cable Entry only), IP67, 5 Years Warranty. Max Run Length if CV - 5M fed from one End. Max Run Length if CC - 13M fed from one End. Typical outputs @ 11W/M 2200K - 800lm/M 2700K - 830lm/M 3000K - 850lm/M 3500K - 860lm/M 4000K - 915lm/M 5300K - 880lm/M

Poly-Flux 16x17mm this is our flagship Poly-Flux profile as it delivers the right proportions to accept the numerous CCT options & mounting arrangements required, Constant Current OR constant voltage options- DC24V, 4.8W / 9.6W or 14.4W/M, 16mm x 17mm (W x H), 50mm modules (20 modules / M), 140LEDS/M, CRI>90, LUMILEDS 2835, 2 Step binning, Vertical Bending, 30cm Open Wire from Both Ends (supplied with anti-syphon cable Ferrule) End, bottom or side feed Cable Entry, IP67, 5 Years Warranty, Extruded from Dow-Corning SilFlex, What have we missed?? -Max Run Length 4.8W = 30M -Max Run Length 9.6W = 20M -Max Run Length 14.4W = 15M (When fed from one end-CC versions only) Single colour options - White/Red/Green/blue: --- for single white color : Constant Current Design or Constant Voltage Design, LUMILEDS 2835 or Sanan 2835 LED - 922/927/930/935/940/950/953 --- for Red/Green/blue color : Constant Current Design or Constant Voltage Design, Sanan 2835 LED Dynamic white - 2700+5300K LUMILEDS 2835 LED, Constant Current Design. RGB - 10W/M Constant Current or Constant Voltage Design fitted with Sanan 5050LED RGBW - 16W/M Constant Current design fitted with Lumileds 5050, Constant Current or Constant Voltage Design, when fitted with Sanan 5050 LEDS White options: 2200K/2700K/3200K/4500K/5500K/6500K NOTE: We always recommend using Constant current versions if possible. MEDIA-D - 10W/M single colours - Blue/White/Red/Green (18 pixels/M) each pixel = 55.555mm, DMX: 24VDC Constant Voltage, fitted with Sanan 2835 LED. Typical outputs: 5W-2200K - 309lm/M 5W-2700K - 317lm/M 5W-3000K - 342lm/M 5W-3500K - 356lm/M 5W-4000K - 356lm/M 5W-5300K - 337lm/M 5W-5000K - 337lm/M 10W-2200K - 611lm/M 10W-2700K - 630lm/M 10W-3000K - 673lm/M 10W-3500K - 706lm/M 10W-4000K - 702lm/M 10W-5300K - 670lm/M 10W-5000K - 668lm/M 15W-2200K - 880lm/M 15W-2700K - 902lm/M 15W-3000K - 967lm/M 15W-3500K - 1016lm/M 15W-4000K - 1016lm/M 15W-5300K - 954lm/M 15W-5000K - 954lm/M 5W / 10W & 15W single colour RED/GREEN or BLUE RGB 10W/M RGBW 16W/M Red-58lm/M Green-194lm/M Blue-32lm/M W22-200lm/M W27-219lm/M W32-224lm/M W45-226lm/M W55-237lm/M W65-229lm/M Total Typ = 510lm/M @ 16W/M 10W/M - MEDIA-D single colour: Blue/Green/Red/White Constant Voltage - 24VDC 10W/M 126leds/M 18pixels/M (55.55mm 7 leds/module) DMX512 control, Max run 5M powered from 1 end, supplied in 5M reels (90 modules).

Aluminium rigid mounting channel supplied in 2M lengths - PF1617-Alu/MCH/2M

Aluminium Flexible Milled mounting channel supplied in 2M lengths - PF1617-Alu/F-MCH/2M

Aluminium rigid plaster-in channel supplied in 2M lengths - PF1617-Alu/PI-CH/2M

Aluminium Flexible Milled Plaster-in mounting channel supplied in 2M lengths - PF1617-Alu/F-PI-MCH/2M

Clear Polycarbonate mounting channel supplied in 2M lengths - PF1617-PC/MCH/2M

Trimmed Aluminium rigid mounting channel supplied in 2M lengths - PF1617-Alu/T-MCH/2M

Adjustable Mounting bracket for use with Rigid or Polycarbonate Mounting Channels - PF1617-M-BRKT

L shape Mounting bracket for Rigid Profile - PF1617-EXT-BRKT

Individual Mounting clips (4/bag) - PF1617-MTG-Clips

DIY on site 2 Pole Termination kit (IP66) - PF1617-TC-End (End feed)

DIY on site 2 Pole Termination kit (IP66) - PF1617-TC- Bottom (Bottom feed)

DIY on site 2 Pole Termination kit (IP66) - PF1617-TC-Side-R (Side feed-Right)

DIY on site 2 Pole Termination kit (IP66) - PF1617-TC-Side-L (Side feed-Left)

ANTI SYPHON CABLE FERRULE - FACTORY FIT ONLY!

SITE CUTTERS WITH SPARE BLADES (STANLEY) AND ADJUSTABLE FENCE

POLYFLUX DIA-25MM White & Digital single colour flexible Silicone NEON - 2700+5000K CV only - DC24V, 5W / 10W/M, Diameter 25, 50mm modules (20 modules / M), 140LEDS/M, CRI>90, LUMILEDS 2835, 2 Step binning, multiple axis Bending, 30cm Open Wire from Both Ends, End Cable Entry, IP65, 5 Years Warranty. Available with End or Side cable entry (EE/SE) - Max Run Length 5W = 28M - Max Run Length 10W = 20M Typical outputs: 5W-2700K-276lm/M 5W-3000K-284lm/M 5W-3500K-306lm/M 5W-4000K-298lm/M 5W-6000K-302lm/M 10W-2700K-517lm/M 10W-3000K-529lm/M 10W-3500K-600lm/M 10W-4000K-556lm/M 10W-6000K-586lm/M MEDIA-D - 10W/M single colours - Blue/White/Red or Green (18 pixels/M) each pixel = 55.555mm, DMX: 24VDC Constant Voltage, fitted with Sanan 2835 LED."

POLYFLUX DIA-25MM dynamic white flexible Silicone NEON . CV only - DC24V, 5W+5W/M, Diameter 25, 50mm modules (20 modules / M), 140LEDS/M, CRI>90, LUMILEDS 2835, 2 Step binning, multiple axis Bending, 30cm, 3 core Open Wire from Both Ends, End/side Cable Entry, IP65, 5 Years Warranty. Available with End or Side cable entry (EE/SE) -Max Run Length 10W = 5M

POLYFLUX DIA-25MM RGB flexible Silicone NEON, CV only - DC24V, 3.3W & 3.3W & 3.3W/M = 10W/M, Diameter 25, 50mm modules (20 modules / M), 140LEDS/M, CRI>90, RGB chips, multiple axis Bending, 30cm, 4 core Open Wire from Both Ends, End Cable Entry, IP65, 5 Years Warranty. Available with End or Side cable entry (EE/SE)

POLYFLUX DIA-25MM RGBW flexible Silicone NEON, CV only - DC24V, 4W/Colour = 16W/M, Diameter 25, 50mm modules (20 modules / M), 140LEDS/M, CRI>90, RGBW chips, multiple axis Bending, 30cm, 5 core Open Wire from Both Ends, End Cable Entry, IP65, 5 Years Warranty. Available with End or Side cable entry (EE/SE) White Options: 2200K 2700K 3200K 4500K 5500K 6500K

Polyflux D25 Polycarbonate Profile - LxWxH 2000x30x27.4mm - PF-D25/PC-Profile/2M

Polyflux D25 Open Polycarbonate clips - LxWxH 20x30x27.4mm - PF-D25/PC-O-clips/20mm (4pcs/bag)

Polyflux D25 Closed Polycarbonate clips - PF-D25/PC-C-clips/20mm (4pcs/bag)

Polyflux D25 Open Polycarbonate clips - suspension sets - PF-D25/PC-O-Susp kits/20mm (2pcs/bag) Max drop = 1M - Longer suspension wires on request

Polyflux D25 Closed Polycarbonate clips - suspension sets - PF-D25/PC-C-Susp kits/20mm (2pcs/bag) Max drop = 1M - Longer suspension wires on request

Ceiling Mounted Collet suspension node: Machined from Aluminium alloy - allows factory assembled PF-D25 to pass through collet and twist to lock/Unlock.

Our Ingenious Invisible, well nearly! Chandelier Hanging Node! The Suspension Node is designed for the Fixing of Stainless steel load bearing wire suspension points Together with integrated power Cable slot. Fix 304/306 St-Steel Base part to a Strong sub structure with screws/Bolts, Plaster board & skim over the base part, Front Suspension piston fits into base part, Twist to lock & secure with Grub screws, integrated Circular 3/5 pole Teminal block fits through cut-out. Typical Load / Node = >100KG (dependant on Sub Structure)

The NEW Profile ING35-68 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria to ensure reliability over the lifetime of the luminaire. Available in lengths up to 2M in 25mm increments: including - 600/1200/1500/1800/2000mm The ING35-68 profile houses downward LED boards, A Typical 2M long section with 19.2W down = 3070lm total wattage = 38.4W on dimmable circuit The Profile can include integrated LED spots / PIR detectors / HIGH power LED downlight sections etc. Various end cap designs available and can be in different colour finish to body colour. Max lengths = 2M, can be joined to create continuous runs, Diffusers available in 25M rolls. 75 degree distribution - Opal Diffuser >74% - Frosted Diffuser >89% - Clear Diffuser >95% - Micro Prismatic >66% - Black Diffuser >20% - Aluminium Infill Extrusion - Can retain PICO Downlights or Spotlights - Aluminium Die-cast or CNC Machined endcaps - Wire Suspension kits - Stainless Wall fixing springs/Clips - Stainless Ceiling fixing springs/Clips - Extrusion joiners - 90 / 120 / 180º

The NEW Profile ING46-68 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Available in lengths up to 2M in 25mm increments: including - 600/1200/1500/1800/2000mm The ING46-68 profile houses downward LED boards, A Typical 2M long section with 19.2W down = 3070lm total wattage = 38.4W on dimmable circuit The Profile can include integrated LED spots / PIR detectors / HIGH power LED downlight sections etc. Various end cap designs available and can be in different colour finish to body colour. Max lengths = 2M, can be joined to create continuous runs. 65 degree distribution - Opal Diffuser >74% (can clip in 2 positions - flush or slightly recessed) - Aluminium Die-cast or CNC Machined endcaps - Wire Suspension kits - Stainless Wall fixing springs/Clips - Stainless Ceiling fixing springs/Clips - Extrusion joiners - 90 / 120 / 180º

The NEW Profile ING20-40 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Available in lengths up to 2M in 25mm increments: including - 600/1200/1500/1800/2000mm The ING20-40 profile houses downward LED boards, A Typical 2M long section with 19.2W down = 3070lm total wattage = 38.4W on dimmable circuit The Profile can include integrated LED spots / PIR detectors / HIGH power LED downlight sections etc. Various end cap designs available and can be in different colour finish to body colour. Max lengths = 2M, can be joined to create continuous runs with Diffuser supplied in >25M rolls. 65 degree distribution - Opal Diffuser >64% (25M rolls) - Aluminium Die-cast or CNC Machined endcaps - Wire Suspension kits - Stainless Ceiling fixing springs/Clips - Extrusion joiners - 90 / 120 / 180º

The NEW Profile ING35x42 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. The ING35x42 profile houses INGENIOUS HDLED boards for UP or Downward distribution, A Typical 2M long section with 19.2W down = 1535lm Various end cap designs available and can be in different colour finish to body colour. Available in lengths up to 2M in 25mm increments: including - 600/1200/1500/1800/2000mm 50 degree distribution - Diffuser can be supplied in rolls >25M, so can create long seamless lit sections. - Opal Diffuser >74% - Frosted Diffuser >89% - Clear Diffuser >95% - Micro-Prismatic >66% Black Diffuser >20% - Internal Exruded Aluminium side cheeks (used when Main body extrusion is finished Black / Bronze etc.) - Aluminium Die-cast or CNC Machined endcaps - Stainless Wall fixing springs/Clips - Extrusion joiners - 90 / 120 / 180º

The NEW Profile ING24x83 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. The ING24x83 profile houses INGENIOUS HD-LED boards for direct/indirect distribution, A Typical 2M long section with 19.2W LED Boards = 3070lm Various end cap designs available and can be in different colour finish to body colour. Available in lengths up to 2M in 25mm increments: including - 600/1200/1500/1800/2000mm 70 degree distribution - Diffuser can be supplied in rolls >25M, so can create long seamless lit sections. - Opal Diffuser >58% - Milky >75% - Frosted Diffuser >88% - Clear Diffuser >97% - Black Diffuser >21% - Aluminium endcaps - Screw Fix to wall, run cables within the Wiring Channel (silver anodised as standard) Clip on Fascia extrusion - Finished to customers specification.

The NEW Profile ING35x83 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board. Our HD LED strip is designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. The ING35x83 profile houses INGENIOUS HD-LED boards for direct/indirect distribution, A Typical 2M long section with 19.2W LED Boards = 3070lm ↑ & 3070lm ↓ Various end cap designs available and can be in different colour finish to body colour Available in lengths up to 2M in 25mm increments: including - 600/1200/1500/1800/2000mm 70 degree distribution - Diffuser can be supplied in rolls >25M, so can create long seamless lit sections. - Opal Diffuser >58% - Milky >75% - Frosted Diffuser >88% - Clear Diffuser >97% - Micro-prismatic > 66% - Black Diffuser >21% - Integral or remote drivers. - Aluminium endcaps - Screw Fix to wall run cables within the Wiring Channel Clip on Fascia extrusion then diffusers.

The NEW Profile ING50x75 profile has 2 options Diffuser flush with front (D) or recessd with Silver side cheeks (RD). both versions can be fitted with the Ingenious IP20HD, 10mm wide High Density LED board. Our HD LED strip is designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, Specify Uplight & downlight wattages. The ING50x75 profile houses INGENIOUS HD-LED boards for direct/indirect distribution, A Typical 2M long section with 19.2W LED Boards = 3070lm ↑ & 3070lm ↓ Various end cap designs available and can be in different colour finish to body colour. Max lengths = 2M, can be joined to create continuous runs, available in 25mm increments: including - 600/1200/1500/1800/2000mm 135 degree ↑ 90 degree ↓ distribution - Diffusers can be supplied in rolls >25M, so can create long seamless lit sections. Downward Diffuser: - Opal Diffuser >68% - Micro-prismatic > 62% - Black Diffuser >22% - Integral or remote drivers. - Aluminium endcaps - Suspension kits - Wall clips - Gear tray clips - Allignment joiners 90º / 120º / 180º

The NEW Profile ING60x90 profile allows for the Integral led tray to project vertically or tilt by 15 degrees, for a asymmetric distribution depending where its is inserted. The 60x90 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board. Our HD LED strip is designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. The ING60x90 profile houses INGENIOUS HD-LED boards for direct/indirect distribution, A Typical 2M long section with 19.2W LED Boards = 3070lm ↑ & 3070lm ↓ Various end cap designs available and can be in different colour finish to body colour. Max lengths = 2M, can be joined to create continuous runs, available in 25mm increments: including - 600/1200/1500/1800/2000mm 125 degree ↑ 85 degree ↓ distribution - Diffusers can be supplied in rolls >25M, so can create long seamless lit sections. Downward Diffuser: - Opal Diffuser >74% / Micro-prismatic > 65% Integral or remote drivers. - Aluminium endcaps - CNC machined Aluminium endcaps - Suspension kits - Allignment joiners 90º / 120º / 180º

The NEW Profile ING77x74 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board. Our HD LED strip is designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. The ING77x74 profile houses INGENIOUS HD-LED boards for direct distribution, A Typical 2M long section with 19.2W LED Boards = 3070lm ↓ Various end cap designs available and can be in different colour finish to body colour. Max lengths = 2M, can be joined to create continuous runs, available in 25mm increments: including - 600/1200/1500/1800/2000mm 105 degree ↓ distribution Downward Diffuser: - Opal Diffuser >65% - Integral or remote drivers. - Aluminium endcaps - CNC machined Aluminium endcaps - Suspension kits - Allignment joiners 90º / 120º / 180º

The NEW Cove-Flex ING18x18 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport) Opal = 58% Milky = 75% Frosted = 88% Clear = 97% Distribution = 75 degrees

The NEW Cove-Flex ING13.8 x 17.1 with Extruded lens is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport) Clear = 97% Distribution = 60 degrees

The NEW Cove-Flex ING13.6 x 17.1 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport) Distribution = 100 degrees Opal = 60% Clear = 95%

The NEW Cove-Flex ING18.4 x 19.5 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport) Opal = 33% Frosted = 61% Clear = 65% Distribution = 120 degrees

The NEW Cove-Flex ING8.5 x 23 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport) Opal = 58% Milky = 75% Frosted = 88% Clear = 97% Black = 21% Distribution = 100 degrees

The NEW Cove-Flex ING 8.5x17.1 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport) Opal = 58% Milky = 75% Frosted = 88% Clear = 97% Black = 21% Distribution = 100 degrees

The NEW Cove-Flex ING 11x30.6 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport) Opal = 70% Milky = 78% Frosted = 91% Clear = 94% Distribution = 110 degrees

The ING 6.5x19.4 profile can be shaped on site to suit the profile required, soft bends only! the diffuser is supplied in 25M rolls so can be attached to create a continuous line. The profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport) Opal = 69% Frosted = 83% Clear = 89% Distribution = 135 degrees

The NEW Cove-Flex ING19 x 19 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M Opal = 69% Distribution = 65 degrees (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex ING 17.2x15 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with MAX-14.4W = 1195lm Opal = 70% Frosted = 84% Clear = 89% Distribution = 100 degrees Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex ING13.5x24.5 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with MAX-14.4W = 1195lm Distrbution = 70º Opal Diffuser = 75% Frosted Diffuser = 88% Clear Diffuser = 97% Black Diffuser = 21% Accessories: Plastic Endcap / Stainless Wall / Ceiling clip / Aluminium diffuser / Suspension kits / CNC Aluminium End caps / Joiners - 60/90/120/180º (X&Y axis available)

The NEW Cove-Flex ING16x19.5 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M Distribution = 120º Clear Diffuser = 97% (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex ING-SQ19.5x20.2 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Distrbution = 160º Opal Diffuser = 75% Frosted Diffuser = 88% Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex ING-RD19.5x20.2 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Distrbution = 160º Opal Diffuser = 75% Frosted Diffuser = 88% Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex ING9x56.7 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Distrbution = 100º Opal Diffuser = 75% Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex ING-SQ 30x30 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Distrbution = 120º Opal Diffuser = 41% Frosted Diffuser = 43% Clear Diffuser = 50% Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex ING-RD 30x30 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Distrbution = 120º Opal Diffuser = 41% Frosted Diffuser = 43% Clear Diffuser = 50% Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex ING-SQ 16x16 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Distrbution = 120º Opal Diffuser = 55% Frosted Diffuser = 70% Clear Diffuser = 76% Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex ING-RD 16x16 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Distrbution = 120º Opal Diffuser = 55% Frosted Diffuser = 70% Clear Diffuser = 76% Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Terra-Flex ING8.2x19.1mm IP65 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution: 120º Opal diffuser light transmission = 39% A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Terra-Flex ING11x27.1 - IP65 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution: 90º Opal diffuser light transmission = 54% A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport)

The NEW Terra-Flex ING30x30.5 - IP67 DRIVE - OVER profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution: 80º Opal diffuser light transmission = 45% A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport)

The NEW Terra-Flex ING-57x79 - IP67 DRIVE-OVER, Rooted Profile alows profile to be Cast into the Floor and the IP67 Polycarbonate LED housing to snap inplace at second fix stage. The extruded Polycarbonate housing is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution: 80º Opal diffuser light transmission = 45% A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport)

The NEW Tube-Flex ING-D24 profile Designed as a Wardrobe hanging Rail with polycarbonate Top insert to aid the smothness of clothes hangers. Rail is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution = 80 degrees Opal transmission = 47% A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport)

The NEW Tube-Flex ING-15x28.6mm profile is designed as a very strong Wardrobe hanging Rail for heavy/long runs. Rail is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Opal diffuser = 79% distribution = 40º

The NEW Tube-Flex ING34 profile Designed as a pendant or picture light and is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution = 90 degrees Opal transmission = 40% Frosted transmission = 45% A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Tube-Flex ING30 profile Designed as a Pendant or picture light and is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution = 120 degrees Opal transmission = 79% A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Tube-Flex ING60 profile Designed as a Decorative Tubular pendant and is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution = 165 degrees Opal transmission = 74% A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Tube-Flex ING75 profile was designed to create Suspended Pendants & Chandelier sections, hanging individually or in clusters, sections are fitted with the 6 No: Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution = 360 degrees Opal transmission = 70% A Typical 1M long section with 4.8W led strip = 2700lm / 9.6W = 5160lm Max lengths = 3M (Longer lengths to order, BUT increase risk of damage and cost of transport)

The NEW Cove-Flex ING-L17.3x19.5 profile was designed to create a colimated profile when fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, giving a narrow 30º or 60º distribution. Light Transmission 133% Accessories: Plastic Endcap Stainless Wall/Ceiling clip Suspension kits CNC Aluminium End caps Joiners - 60/90/120/180º (X&Y axis available)

The NEW Cove-Flex ING-17.3x19.5 profile was designed to compliment the colimated profile ING-L17.3x19.5 and is fitted with the Ingenious IP20HD, 10mm wide High Density LED board. This is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, giving a wide 80º distribution. Opal transmision = 65% Accessories: Plastic Endcap Stainless Wall/Ceiling clip Aluminium diffuser Suspension kits CNC Aluminium End caps Joiners - 60/90/120/180º (X&Y axis available)

The NEW Cove-Flex ING-18.8x19.5 profile was designed to compliment the colimated profile ING-L17.3x19.5 and is fitted with the Ingenious IP20HD, 10mm wide High Density LED board. This is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, giving a very wide 120º distribution. Opal = 51% Milky = 56% Frosted = 65% Clear = 73% Distribution = 120 degrees Accessories: Plastic Endcap Stainless Wall/Ceiling clip Aluminium diffuser Suspension kits CNC Aluminium End caps Joiners - 60/90/120/180º (X&Y axis available)

The NEW Cove-Flex ING-37.5 x 90 profile was designed primarliy as a pendant luminaire, and is fitted with the Ingenious IP20HD, 10mm wide High Density LED board. This is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, giving a very wide 115º distribution. The profile can be mitred and assembled into rectangles or squares and suspended over desks or in open areas. Opal diffuser = 74% Diffuser available in 25M rolls 115 degree distribution Accesories: Aluminium end caps Suspension kits Joiners-90/120/180º

The NEW Cove-Flex ING-25.7 x 60mm stair nosing profile is fitted with the Ingenious IP20HD-5, 5mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 5mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) Distribution = 40º Diffuser can be on 25M roll. Transmission Opal diffuser = 40% fitted with 25mm Black Anti-slip rubber insert

The NEW Cove-Flex ING-27.8 x 67.5mm stair nosing profile is fitted with the Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 5mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) Distribution = 40º Diffuser can be on 25M roll. Transmission Opal diffuser = 40%

The NEW Cove-Flex ING-37.9x82.4mm stair nosing profile is fitted with the Ingenious IP20HD-5, 5mm wide & IP20HD10 High Density LED boards, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 5/10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) Top diffuser = Milky Silicone rubber / Lower diffuser = Polycarbonate Distribution = 40º Diffuser can be on 25M roll. Transmission Opal diffuser = 40% fitted with 25mm Black Anti-slip rubber insert

The NEW Cove-Flex ING-ASY-42.6mm plaster in wall wash profile is fitted with the Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) 60 degree distribution Opal tranmission = 50% Joiners: 90/120/180º

The NEW Cove-Flex ING-ASY-41.2mm plaster in wall wash profile is fitted with the Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) 60 degree distribution Opal tranmission = 50%

The NEW Cove-Flex ING-20.7x24 plaster in profile is fitted with the Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) 55 degree distribution Opal transmission = 58% Milky = 75% Frosted = 88% Clear = 97% Black = 21%

The NEW Cove-Flex ING-16.4x26.4mm plaster in profile is fitted with the Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) Opal transmission = 66% can be supplied in 25M rolls to create a continuous unbroken line. Diffuser can be fitted after all decoration is completed to create a sharp clean edge! 60 degree distribution

The NEW Cove-Flex ING-8x9mm plaster in profile is fitted with the Ingenious IP20HD-5, 5mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 5mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) Opal transmission = 45% Black Diffuser = 24% can be supplied in 25M rolls to create a continuous unbroken line. Diffuser can be fitted after all decoration is completed to create a sharp clean edge! 45 degree distribution

The NEW Cove-Flex ING-18.9x26.1mm Internal corner - plaster in profile is fitted with the Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) Opal transmission = 68% can be supplied in 25M rolls to create a continuous unbroken line. Diffuser can be fitted after all decoration is completed to create a sharp clean edge! 60 degree distribution

The NEW Cove-Flex ING-18.9x23.7mm External corner - plaster in profile is fitted with the Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) Opal transmission = 68% can be supplied in 25M rolls to create a continuous unbroken line. Diffuser can be fitted after all decoration is completed to create a sharp clean edge! 60 degree distribution

The NEW Cove-Flex ING-ASY-13.1x38mm Floor wash profile is fitted with the Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport) Opal = 65% Distribution = 70 degrees Accessories: cast Aluminium end/side cheeks Stainless Wall/Ceiling clip Joiners - 90/180º (X&Y axis available)

The NEW Cove-Flex ING-ASY-25.4x70mm Floor wash profile is fitted with the Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm Opal = 58% Milky = 75% Frosted = 88% Clear = 97% Black = 21% Distribution = 100 degrees Diffusers available in 25M rolls Accessories: cast Aluminium end/side cheeks Stainless Wall/Ceiling clip Metal solid wall clip/spring Joiners - 90/180º (X&Y axis available)

ING-25x29.7mm extruded profile with cable way is an Ingenious linear Multi-Distribution Projector. Distribution: 30 or 60º with clear extruded lenses or 90º with Opal diffuser. L30º / L60º / D 30 & 60 degree clear extruded lens >95% transmission Opal Diffuser, 90 degree distribution > 65% transmission Extrusion is fitted with the Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm

Wall or Ceiling Recessed trim-less profile with a 60 degree distribution to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity. The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 60 degree distribution Opal Diffuser >74% Frosted > 89% Clear > 95% Black Diffuser >20% Micro-prismatic > 66% (Suplied in 25M rolls to create continuous diffuser with minimal breaks) Accesories: Aluminium Infill diffuser - Can retain PICO Downlights or Spotlights or simply create a non-illuminated section. Aluminium Die-cast or CNC machined endcaps Internal extruded Reflector side cheeks Stainless Ceiling fixing springs/Clips Extrusion joiners - 90 / 120 / 180º

Wall or Ceiling Recessed trim-less profile with a 80 degree distribution to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity. The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 80 degree distribution Opal Diffuser >74% Black > 22% Micro Prismatic >62% (Suplied in 25M rolls to create continuous diffuser with minimal breaks) Accesories: Aluminium Infill Extrusion - Can retain PICO Downlights or Spotlights or simply create a non-illuminated section. Internal Extruded Aluminium side cheeks - Anodised silver as standard Aluminium Die-cast or CNC Machined endcaps Internal extruded Reflector side cheeks Stainless Ceiling fixing springs/Clips Extrusion joiners - 90 / 120 / 180º

Wall or Ceiling Recessed trim-less profile with a 90 degree distribution to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity. The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 90 degree distribution Opal Diffuser >74% Micro Prismatic >65% (Suplied in 25M rolls to create continuous diffuser with minimal breaks) Accesories: Aluminium Infill Extrusion - Can retain PICO Downlights or Spotlights or simply create a non-illuminated section. Internal Extruded Aluminium side cheeks - Anodised silver as standard Aluminium Die-cast or CNC Machined endcaps Internal extruded Reflector side cheeks Stainless Ceiling fixing springs/Clips Extrusion joiners - 90 / 120 / 180º

Wall or Ceiling Recessed trim-less profile with a 110 degree distribution to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity. The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 110 degree distribution Opal Diffuser >74% (Suplied in 25M rolls to create continuous diffuser with minimal breaks) Accesories: Aluminium Infill Extrusion - Can retain PICO Downlights or Spotlights or simply create a non-illuminated section. Internal Extruded Aluminium side cheeks - Anodised silver as standard Aluminium Die-cast or CNC Machined endcaps Internal extruded Reflector side cheeks Stainless Ceiling fixing springs/Clips Extrusion joiners - 90 / 120 / 180º

Wall or Ceiling Recessed Profile with a 60 degree distribution to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 60 degree distribution Opal Diffuser >74% supplied in 25M rolls Frosted > 89% Clear > 95% Micro-prismatic > 66% Black diffuser >22% Accesories: Aluminium Infill Extrusion - Can retain PICO Downlights or Spotlights Aluminium Die-cast or CNC Machined endcaps Stainless Ceiling fixing springs/Clips Extrusion joiners - 90 / 120 / 180º "

Wall or Ceiling Recessed Profile with a 70 degree distribution to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 70 degree distribution Opal Diffuser >74% supplied in 25M rolls Micro-prismatic > 62% Black diffuser >22% Accesories: Aluminium Infill Extrusion - Can retain PICO Downlights or Spotlights Aluminium Die-cast or CNC Machined endcaps Internal extruded Reflector side cheeks/bezel trims Stainless Ceiling fixing springs/Clips Extrusion joiners - 90 / 120 / 180º

Wall or Ceiling Recessed Profile with a 80 degree distribution to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 80 degree distribution Opal Diffuser >74% supplied in 25M rolls Micro-prismatic > 65% Accesories: Aluminium Infill Extrusion - Can retain PICO Downlights or Spotlights Aluminium Die-cast or CNC Machined endcaps Internal extruded Reflector side cheeks/bezel trims Stainless Ceiling fixing springs/Clips Extrusion joiners - 90 / 120 / 180º

Wall or Ceiling Recessed Profile with a 100 degree distribution to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 100 degree distribution Opal Diffuser >74% supplied in 25M rolls Accesories: Aluminium Infill Extrusion - Can retain PICO Downlights or Spotlights Aluminium Die-cast or CNC Machined endcaps Internal extruded Reflector side cheeks/bezel trims Stainless Ceiling fixing springs/Clips Extrusion joiners - 90 / 120 / 180º

Ceiling Suspended profile Profile with direct/indirect distribution a 90 degree distribution to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 90 degree distribution Opal Diffuser >74% Minimum Bend Radius = 600mm Accesories: Suspension kits. Invisible internal Extrusion joiners. Heat formed & Curved Diffusers.

Ceiling Suspended profile Profile with direct downward 100 degree distribution, to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 100 degree distribution Opal Diffuser >74% Minimum Bend Radius = 1000mm Accesories: Suspension kits. Invisible internal Extrusion joiners. Heat formed & Curved Diffusers.

Ceiling recessed profile with direct downward 100 degree distribution, to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 100 degree distribution Opal Diffuser >74% Minimum Bend Radius = 1000mm Accesories: Ceiling fix kits Invisible internal Extrusion joiners. Heat formed & Curved Diffusers.

Ceiling Suspended profile with direct / indirect 100 degree distribution, to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 100 degree distribution Opal Diffuser >74% Minimum Bend Radius = 1000mm Accesories: Suspension kits Invisible internal Extrusion joiners. Heat formed & Curved Diffusers.

Ceiling Suspended profile with direct / indirect 100 degree distribution ↑↓, to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 100 degree distribution Opal Diffuser >74% Minimum Bend Radius = 1000mm Accesories: Suspension kits Invisible internal Extrusion joiners. Heat formed & Curved Diffusers.

Ceiling Surface / Suspended profile with direct 100 degree distribution ↓, to accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 100 degree distribution Opal Diffuser >74% Minimum Bend Radius = 1000mm Accesories: Suspension kits Invisible internal Extrusion joiners. Heat formed & Curved Diffusers.

Ceiling Surface / Suspended profile with sideway 100 degree distribution, towards centre of circle →. To accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 100 degree distribution Opal Diffuser >74% Minimum Bend Radius = 1000mm Accesories: Suspension kits Invisible internal Extrusion joiners.

Ceiling Surface / Suspended profile with sideway 100 degree distribution, ← →. To accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 100 degree distribution Opal Diffuser >74% Minimum Bend Radius = 1000mm Accesories: Suspension kits Invisible internal Extrusion joiners.

Ceiling / Wall Plaster in profile with forward 100 degree distribution. To accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. Plaster in the Rolled strip, securing with the Side sliding brackets as necessary, ensuring no ingress of Plaster or paint onto the ed boards, Finish decoration then finally clip diffuser in place, Diffuser supplied in 20M rolls for cutting on site. 100 degree distribution Opal Diffuser >74% Minimum Bend Radius = 1000mm Accesories: SS Side mounting brackets Invisible External Extrusion joiners.

Ceiling / Wall Trimmed profile with forward 100 degree distribution. To accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. Insert Rolled Profile into slot in ceiling / wall, securing with screws through rear of extrusion, finally clip in diffuser, Diffuser is constructed from Laser cut central section with extruded Opal side clip section. 100 degree distribution Opal Diffuser >74% Minimum Bend Radius = 1000mm Accesories: Invisible External Extrusion joiners. Internal Extruded side reflectors

Ceiling / Wall Trimmed profile with forward 100 degree distribution. To accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. Insert Rolled Profile into slot in ceiling / wall, securing with screws through rear of extrusion, or using supplied side springs, finally clip in diffuser, Diffuser is supplied in 20M reels 100 degree distribution Opal Diffuser >74% Minimum Bend Radius = 1000mm Accesories: Invisible Internal Extrusion joiners. Internal Extruded side reflectors

Ceiling / Wall, Surface, Recessed or Suspended LED profile, with forward 100 degree distribution. To accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 100 degree distribution Opal Diffuser >74% Diffuser supplied in 20M reels Minimum Bend Radius = 1000mm Accesories: Invisible Internal Extrusion joiners. Internal Extruded side reflectors Suspension kits

Ceiling / Wall, Surface, Recessed or Suspended LED profile, with forward 100 degree distribution. To accept our Ingenious IP20HD-10, 10mm wide High Density LED board, a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire, supplied in 25mm increments. 100 degree distribution Opal Diffuser >74% Diffuser supplied in 20M reels Minimum Bend Radius = 1000mm Accesories: Invisible Internal Extrusion joiners. Internal Extruded side reflectors Suspension kits

The NEW Cove-Flex ING-WP2 is WATERPROOF to IP67, constructed from UV stabalised and corrosion proof Polycarbonate its perfect for Spa or swimming pool environments where Chlorine or salt in the atmosphere can quickly degrade Aluminium & Stainless steel profiles. The ING-WP2 is fitted with the "Ingenious" IP20-HD, 10mm wide High Density LED board, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, bonded to an internal Aluminium Heatsink rail, all the design criteria to ensure reliability over the lifetime of the luminaire. A Typical 1M long section with 14.4W = 1195lm/M Max lengths = 2M (Longer lengths to order, BUT increased risk of damage and cost of transport)

The NEW Cove-Flex "ING-17x49" profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution = 2 x 60 degrees Opal transmission = 58% A Typical 1M long section with 2 x 14.4W = 2390lm / 2 x 19.2W = 3070lm Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex "ING-27.7x70" profile was designed to create a discreet linear direct-indirect wall lightl, sections are fitted with the 2 No: Ingenious IP20HD, 10mm wide High Density LED board is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. Distribution = 2 x 60 degrees Opal transmission = 58% Milky = 75% Frosted = 88% Clear = 97% Black = 21% A Typical 1M long section with 4.8W led strip = 900lm / 9.6W = 1720lm Max lengths = 2M (Longer lengths to order, BUT increase risk of damage and cost of transport)

The NEW Cove-Flex ING-17.1x18.8 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board, is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. The Internal Heatsink Rail can be moved to adjust the distribution between 10/30/60 or 90º By fitting the IP20HD board dirrectly onto the base extrusion we can create a narrow distribution of 10º A Typical 1M long section with 14.4W = 1195lm / 19.2W = 1535lm Max lengths = 2M (Longer lengths to order, BUT increae risk of damage and cost of transport)

The NEW Cove-Flex ING-22x24.5 profile is fitted with the Ingenious IP20HD, 10mm wide High Density LED board, is a top quality LED strip designed for general use, engineered for realiabilty & longevity, The 10mm Wide, 2oz, 5 Amp rated Buss bar PCB construction can carry >120W of load powered from one end, all design criteria is to ensure reliability over the lifetime of the luminaire. We can offer 3 distributions 30/60 or 80º By fitting the IP20HD board dirrectly onto the base extrusion we have the options of 30 or 60º extruded lenses or slide in Micro-prismatic @ 80º We also have 2 x Baffle options - Injection moulded Matt-Black polycarbonate - Honeycomb or crossblade louvres 45 degree cut-off angle (in 200mm sections) Option 1: Clear Micro-prismatic Option 2: Micro-prismatic with Honeycomb louvre Option 3: Micro-prismatic with Crossblade louvre Option 4: 30º lens with Honeycomb louvre Option 5: 30º lens with Crossblade louvre Option 6: 60º lens with Honeycomb louvre Option 7: 60º lens with Crossblade louvre Accesories: St-Steel spring clips Adjustable mounting brackets End caps Extrusion joiners - 90 / 120 / 180º

A stunning battery powered desk light for outside dinning / restaurants / cafes / terraces / pool areas. The Aluminium & acrylic construction ensure a solid reliable construction with USBC charging port with rubber cover IP65 protection 3W output / CCT Colour changing / LION Polymer batteries (1500mAh) Available in 4 colour options: Orange/Red/White/Pale-Blue Runtime's - Lowest brightness = 24 hours / Highest Brightness = 5 hours to Fully charge from flat = 2.5 hours Selectable Outputs = 2200/2700/3000K IP20 for USBC port (IP65 with rubber plug fitted). Multi-charger Cable looms available to order (charge 10 fittings from 1 x plug/Adapter)

The Deck 50 is a very compact IP42, 50mm square x 24mm deep asymmetric Floor washer, the 2 part 316 Stainless steel fascia and extruded Aluminium body houses a single CREE XD16 chip @ CRI90. The ingenious, minimal design delivers a stunning & powerful lighting effect up to 281lm @ 2700K. The precision laser cut fascia and reflector component cleverly mesh to create a razor edge detail so reflector part can be finished matt with the fascia in a mirror polished finish. The included BZP backplate is screw fixed to the rear substrate then the Deck 50 body is magnetically retained within the aperture by the strong Rare Earth magnets with no visible fixings. - Input Voltage - Constant Current - 2.75>3.1VDC / - Input Voltage - 12 or 24V Constant Voltage version available to order - CCT options - 2700 / 3000 / 3500 / 4000 / 5000 / 6000°K (Specific CCT, colours or Tuneable white versions to order) - CRI 90 - Power - 1 > 3W - Life - >50,000 hours (5 year manafacturers warranty) - Dimensions: L-50 / W-50 / D-24mm - Finish options - Matt & Polished stainless steel, Powder coated finishes - White / Black or Special BS/RAL finishes to order, reflector - satin silver anodised. - Working Temperature -20 > +55°C

The Deck 60 is a very compact IP66, 60mm square x 18mm deep asymmetric Floor washer, the 2 part 316 Stainless steel body houses a CREE XD16 LED Chip. The ingenious, minimal design delivers a stunning & powerful lighting effect up to 324lm @2700K. The precision die-cast fascia and reflector components cleverly mesh to create a razor edge detail so reflector part can be finished matt with the fascia in a mirror polished finish. Two rear housings are offered - Standard BZP backplate that is screw fixed to the rear substrate or a 316 St-Steel wiring box used when you need to seal the cut-out aperture. The Deck 60 body is magnetically retained within either housing by the two strong Rare Earth magnets fixed to the rear of the body. - Input Voltage - Constant Current 2.75>3.1VDC - Input Voltage - 12 or 24V Constant Voltage version available to order - CCT options - 2700 / 3000 / 3500 / 4000 / 5000 / 6000°K (Specific CCT, colours or Tuneable white versions to order) - CRI 90 - Power - 1 > 3W - Life - >50,000 hours (5 year manufacturers warranty) - Dimensions: L-60 / W-60 / D-19mm (dependant on back box option) - Finish options - Matt & Polished stainless steel with numerous Brass / Bronze PVD finish options - Working Temperature -20 > +55°C

Cube - a simple architectural, beatifully engineered wall light for numerous applications, stairs, bathrooms, above beds, or used in sets to create a stunning feature. The sharp lines and infinitely adjustable distribution make it a very useful lighting tool, integral TRIAC dimming driver & LUMINUS CRI95 chips, 3 way integral terminal block all ensure a reliable >50,000hrs, easy to install classic fitting.

ROUND TRIMMED - The Updated & refined Gallery range includes 6/10/15 & 20W versions, using the latest Citizen VIVID led COB's, Round or square, Trimmed or Plaster-in bezels, All are adjustable to >30 degrees with round or oval aperture "Snoot" or standard Deeply Recessed Reflector and New Wall-wash versions. - Trimmed or Plaster in versions available in CRI90 or CRI97 - Wattages 6W, 10W, 15W or 20W - Numerous low-glare baffle versions to suit any application - Round & Oval aperture cutouts Supplied as standard with Matt black baffles (RB-Round baffle/OB-Oval baffle/R-reflector/WW-wall-Wash) - Huge selection of Reflector/baffle options & finishes to compliment any interior - CRI: Ra90 or Ra97 - CCT: 2700K/3000K/3500K/4000K or 5000K or Tuneable white versions - Beam angle: 15/24/36/50 degree - Indoor lighting, Flicker free, dimming to <0.1%, 5 year warranty - >70,000 hr life - Driver options - DALI/TRIAC/0-10V/DMX/Casambi/Zigbee"

ROUND PLASTER-IN - The Updated & refined Gallery range includes 6/10/15 & 20W versions, using the latest Citizen VIVID led COB's, Round or square, Trimmed or Plaster-in bezels, All are adjustable to >30 degrees with round or oval aperture "Snoot" or standard Deeply Recessed Reflector and New Wall-wash versions. - Trimmed or Plaster in versions available in CRI90 or CRI97 - Wattages 6W, 10W, 15W or 20W - Numerous low-glare baffle versions to suit any application - Round & Oval aperture cutouts Supplied as standard with Matt black baffles (RB-Round baffle/OB-Oval baffle/R-reflector/WW-wall-Wash) - Huge selection of Reflector/baffle options & finishes to compliment any interior - CRI: Ra90 or Ra97 - CCT: 2700K/3000K/3500K/4000K or 5000K or Tuneable white versions - Beam angle: 15/24/36/50 degree - Indoor lighting, Flicker free, dimming to <0.1%, 5 year warranty - >70,000 hr life - Driver options - DALI/TRIAC/0-10V/DMX/Casambi/Zigbee"

SQUARE TRIMMED - The Updated & refined Gallery range includes 6/10/15 & 20W versions, using the latest Citizen VIVID led COB's, Round or square, Trimmed or Plaster-in bezels, All are adjustable to >30 degrees with round or oval aperture "Snoot" or standard Deeply Recessed Reflector and New Wall-wash versions. - Trimmed or Plaster in versions available in CRI90 or CRI97 - Wattages 6W, 10W, 15W or 20W - Numerous low-glare baffle versions to suit any application - Round & Oval aperture cutouts Supplied as standard with Matt black baffles (RB-Round baffle/OB-Oval baffle/R-reflector/WW-wall-Wash) - Huge selection of Reflector/baffle options & finishes to compliment any interior - CRI: Ra90 or Ra97 - CCT: 2700K/3000K/3500K/4000K or 5000K or Tuneable white versions - Beam angle: 15/24/36/50 degree - Indoor lighting, Flicker free, dimming to <0.1%, 5 year warranty - >70,000 hr life - Driver options - DALI/TRIAC/0-10V/DMX/Casambi/Zigbee"

SQUARE PLASTER-IN - The Updated & refined Gallery range includes 6/10/15 & 20W versions, using the latest Citizen VIVID led COB's, Round or square, Trimmed or Plaster-in bezels, All are adjustable to >30 degrees with round or oval aperture "Snoot" or standard Deeply Recessed Reflector and New Wall-wash versions. - Trimmed or Plaster in versions available in CRI90 or CRI97 - Wattages 6W, 10W, 15W or 20W - Numerous low-glare baffle versions to suit any application - Round & Oval aperture cutouts Supplied as standard with Matt black baffles (RB-Round baffle/OB-Oval baffle/R-reflector/WW-wall-Wash) - Huge selection of Reflector/baffle options & finishes to compliment any interior - CRI: Ra90 or Ra97 - CCT: 2700K/3000K/3500K/4000K or 5000K or Tuneable white versions - Beam angle: 15/24/36/50 degree - Indoor lighting, Flicker free, dimming to <0.1%, 5 year warranty - >70,000 hr life - Driver options - DALI/TRIAC/0-10V/DMX/Casambi/Zigbee"

SQUARE TRIMMED x2 - The Updated & refined Gallery range includes 6/10/15 & 20W versions, using the latest Citizen VIVID led COB's, Round or square, Trimmed or Plaster-in bezels, All are adjustable to >30 degrees with round or oval aperture "Snoot" or standard Deeply Recessed Reflector and New Wall-wash versions. - Trimmed or Plaster in versions available in CRI90 or CRI97 - Wattages 6W, 10W, 15W or 20W - Numerous low-glare baffle versions to suit any application - Round & Oval aperture cutouts Supplied as standard with Matt black baffles (RB-Round baffle/OB-Oval baffle/R-reflector/WW-wall-Wash) - Huge selection of Reflector/baffle options & finishes to compliment any interior - CRI: Ra90 or Ra97 - CCT: 2700K/3000K/3500K/4000K or 5000K or Tuneable white versions - Beam angle: 15/24/36/50 degree - Indoor lighting, Flicker free, dimming to <0.1%, 5 year warranty - >70,000 hr life - Driver options - DALI/TRIAC/0-10V/DMX/Casambi/Zigbee"

SQUARE PLASTER-IN x2 - The Updated & refined Gallery range includes 6/10/15 & 20W versions, using the latest Citizen VIVID led COB's, Round or square, Trimmed or Plaster-in bezels, All are adjustable to >30 degrees with round or oval aperture "Snoot" or standard Deeply Recessed Reflector and New Wall-wash versions. - Trimmed or Plaster in versions available in CRI90 or CRI97 - Wattages 6W, 10W, 15W or 20W - Numerous low-glare baffle versions to suit any application - Round & Oval aperture cutouts Supplied as standard with Matt black baffles (RB-Round baffle/OB-Oval baffle/R-reflector/WW-wall-Wash) - Huge selection of Reflector/baffle options & finishes to compliment any interior - CRI: Ra90 or Ra97 - CCT: 2700K/3000K/3500K/4000K or 5000K or Tuneable white versions - Beam angle: 15/24/36/50 degree - Indoor lighting, Flicker free, dimming to <0.1%, 5 year warranty - >70,000 hr life - Driver options - DALI/TRIAC/0-10V/DMX/Casambi/Zigbee"